10 ways to help lower your electricity bills

October 3rd, 2011

Every homeowner is troubled by their excessive electrical bills. This is mainly happening due to extreme weather conditions and high electricity prices. Now, there are simple ways to help manage your monthly bills. Some of which are given below.

If you want to keep your electricity bill in check, make sure to turn off the lights when you’re not using them. Home lighting is said to add 25% in your total bill so if you can just keep the lightings in check than you can definitely save a lot of power and minimize the energy cost. Now, the best way to do that is by using dimmers and lower wattage bulbs. You can use motion sensors to save power as these lights illuminate only when needed. Also replace your incandescent bulbs with florescent or power saving bulbs.

Now there are many other ways to helps you do away with the excessive amount of electrical bills. For example, homeowners can save a lot of electricity by raising the thermostat during summer and lowering it during winter. You can also replace your existing thermostat with an electronic or programmable thermostat. These thermostats automatically adjust your heating and cooling systems to energy saving levels, even while you’re away or sleeping.

Furthermore, don’t forget to replace or clean your air filters. This helps to improve the efficiency of your heating and cooling systems as a result of which you can easily maintain comfortable temperature during summers without adding on to your electrical bills.

Home appliances including refrigerators consume the most amount of energy i.e.75% of your electrical bill. Therefore it’s a must to keep them in check. Opening the door of the refrigerator as briefly as possible and defrosting whenever necessary is that which ensure its efficiency. It’s only most efficient appliances that consume the least amount of energy.

Lastly, remember to turn off your appliances while you are not using them. Like for example your coffee machine or your television. It’s also better to use a microwave instead of an electric oven for cooking. Similarly, gas water heater saves more energy than electric water heater.

,

Advantages of hiring a professional electrical contractor

September 8th, 2011

If you are planning to build a house or establish a business, one of the most essential factors to consider is the electricity line. This is to make sure that you and your property are safe from electrical hazards such as fire and the only way to do so is by hiring a professional electrical contractor. A professional electrical contractor will efficiently install cables and wirings; because they are the root cause of most reported fire related accidents. Hence, employing specialized electricians is a must for avoiding such issues in the future. Many people think they are capable of fixing small problems like electrical wiring on their own but that too can be very risky and dangerous.

Now, it is good that you can actually repair certain things and that does come in handy but that’s a big NO NO unless you have had some formal training on how to repair or install faulty wiring. Remember, small electrical problems can lead to major accidents in no time so it’s important that a professional takes a look at the problem and secures you plus your home from possible damage.

It goes without saying that the work of an electrical contractor is more reliable when compared to yours. Additionally, they are knowledgeable and, therefore, well informed to handle electrical problems. They are also trained and possess certain amount of experience dealing with electrical problems of various kinds. They can not only predict but can also prevent future hazards. Though they do not come for free, employing them and spending a few dollars is worth all the risk i.e. the risk of killing yourself or starting a fire that could turn everything to ashes.

There are many options and good many contractors to choose from.  Therefore, why not hire one and save yourself from all the worry. What’s more, the problem will be solved successfully once and for all with no issues of faulty wiring and the like. Just remember to opt for a qualified contractor who is capable of discovering the main cause of electrical difficulties in your home and building. Always remember to check their credentials and certificates before hiring them for their electrical services.

, ,

How does a home electrical system work?

July 29th, 2011

Imagine a life without electricity. That would mean no night lights, no television, no refrigerators, no washing machine, no air conditioners, no computers, no internet, no mobile phones and no anything that runs on electricity. Back to the Stone Age aren’t we? So electricity is an absolute essential for life today. You have large industries to the smallest household appliances running on electricity. Hospital machines run on electricity. Life itself runs on electrical system.

Electrical items can be categorized into two components, Rough-in components and finished components. The ones that were installed during the construction phase of your home are rough in components such as wires, cables and electrical boxes etc. The added components towards the end of construction such as outlets and switches are the finished components.

Now electricity comes in from the utility company and is delivered through the three main lines. Two out of the three deliver 120 volts of electricity and are known as hot wires while the remaining one is neutral. Since most household appliances use 120 volts of electricity, only one hot wire is sufficient. But larger appliances like air conditioners, electric ovens, furnaces, etc. require 240-volts of electricity and therefore both the hot wires are used.  The neutral line is a must in electric circuits.

You must have noticed a device known as the electric meter. This is located at the point where electricity reaches your home and its function is to measure the amount of electricity consumed by the household. From this point electricity is channeled to the breaker box and from there distributed to the entire household or building. Electricity flows from the source to the device and then back to the source.

Your circuit breaker box is there for safety reasons. This device purposely breaks the flow of electricity and makes it possible for the technicians to repair or check whenever necessary. So whenever there is a need for electrical repairing it is important to locate the right circuit breaker and turn it off. Also never leave a hot wire hanging out in the open without proper insulation as that too can be hazardous.

, ,

What experts say about about electrical safety

June 17th, 2011

There has been much development in technology in recent years with computers, cell phones, laptops everywhere and many types of electrical equipments in the home and office. Because of so many electrical devices, the need for electrical safety is generally ignored by us. We also do not train our kids on how to use electrical products, such as video games, safely. A large number of people die every year due to electrocution because of accidents that happen in or near their homes. Large numbers of people get injured in house fires that occur due to various electrical causes.

Faulty wiring is an electrical hazard which causes fire and is a serious cause of death and injury. Protecting yourselves and your children involves many ways. Many courses are specially designed to produce electrical safety tips. Additionally, some courses provide in depth training for non-electricians who work around electricity. However, experts always advice hiring electricians, who know the correct codes to do any rewiring that might be needed, rather than suffering the physical consequences of an electrical accident.  Handling wiring and rewiring is known by the professional.

There is a small current of energy or charge in our body, and when other sources of energy find our bodies to be an easier path to the ground, it will pass through us. If the source is not removed quickly enough, this can cause extreme damage and even death. We should handle sources of electricity with extreme caution.

All electrical devices should be kept at places where children might not be able to go to them. You should make sure that you have the proper tools for the job. Do not use anything for any job. All the circuits should be grounded. Circuits should not be overloaded by using too many cords in one outlet. Tools should be kept dry and clean and away from intense heat, oil, gas and other dangerous substances. Cords, while in use, should be maintained properly. You should follow all the rules and procedures when working in electrical equipments.

You should refrain from touching someone who has been electrocuted. You should use wood or a piece of rope for handling the electrocuted person.

In case of a power outage, check that a circuit may have been inadvertently tripped or turned off. You should stand in dry places when resetting fuses.

Electrical safety should be the top priority, when children are present, when we are, camping and especially when we are at home working with power tools or appliances of any kind. There are many things that we can do to prevent the hundreds of deaths every year that occur because of either electrocution or fire due to poor wiring or other preventable situation.

,

How to know your home electrical system safe or not

January 24th, 2011

It is quite a simple process to ascertain if your home electrical system is safe or not. You would be required to invest some time and effort so that you can assess certain things. Most states require a home inspection prior to selling the house. This is the reason why it is essential to ascertain if your home electrical system is safe or not.

The best way to analyze the electrical system within your house is to ensure that you test out the source of the electrical system, and this includes the meter area. A majority of older houses do not have provisions for a central breaker which is positioned at the juncture, thus it could be necessary to install an upgraded service. Within this, you would be required to set up a fresh meter in addition to the key breaker panel within the house, plus reinstate the interior panel too.

Furthermore, in case the house possesses a FPE, or Federal Pacific Electric panel, ensure that it is updated, as they are untrustworthy as well as hazardous.

Next, assess the grounding system. This means that you should look for a ground rod which is positioned beneath the meter by means of a wire linking it to the meter panel, as well as a cold water bond which is situated at the water heater resting on the chief water ingestion of the system, via the copper water pipes like a grunt.

When you are assessing your home electrical system, inspect the type of wiring that was used all through the house.  This can be achieved by merely dissecting the fuse panel or else the breaker which would make it easier for you to glance to perceive if it is made out of copper or aluminum. If the wiring is made out of copper, it is alright. However, in case it is made out of aluminum, you should assess if there is any indication of corrosion. Remember that an Aluminum wire will respond to oxygen while moving current, after which it will corrode and will be seen in the form of powder.

If you witness any signs of damage, do not try to fix this yourself and immediately seek the services of a specialized electrician who would assist you.

, ,