10 ways to help lower your electricity bills

October 3rd, 2011

Every homeowner is troubled by their excessive electrical bills. This is mainly happening due to extreme weather conditions and high electricity prices. Now, there are simple ways to help manage your monthly bills. Some of which are given below.

If you want to keep your electricity bill in check, make sure to turn off the lights when you’re not using them. Home lighting is said to add 25% in your total bill so if you can just keep the lightings in check than you can definitely save a lot of power and minimize the energy cost. Now, the best way to do that is by using dimmers and lower wattage bulbs. You can use motion sensors to save power as these lights illuminate only when needed. Also replace your incandescent bulbs with florescent or power saving bulbs.

Now there are many other ways to helps you do away with the excessive amount of electrical bills. For example, homeowners can save a lot of electricity by raising the thermostat during summer and lowering it during winter. You can also replace your existing thermostat with an electronic or programmable thermostat. These thermostats automatically adjust your heating and cooling systems to energy saving levels, even while you’re away or sleeping.

Furthermore, don’t forget to replace or clean your air filters. This helps to improve the efficiency of your heating and cooling systems as a result of which you can easily maintain comfortable temperature during summers without adding on to your electrical bills.

Home appliances including refrigerators consume the most amount of energy i.e.75% of your electrical bill. Therefore it’s a must to keep them in check. Opening the door of the refrigerator as briefly as possible and defrosting whenever necessary is that which ensure its efficiency. It’s only most efficient appliances that consume the least amount of energy.

Lastly, remember to turn off your appliances while you are not using them. Like for example your coffee machine or your television. It’s also better to use a microwave instead of an electric oven for cooking. Similarly, gas water heater saves more energy than electric water heater.

,

How to know your home electrical system safe or not

January 24th, 2011

It is quite a simple process to ascertain if your home electrical system is safe or not. You would be required to invest some time and effort so that you can assess certain things. Most states require a home inspection prior to selling the house. This is the reason why it is essential to ascertain if your home electrical system is safe or not.

The best way to analyze the electrical system within your house is to ensure that you test out the source of the electrical system, and this includes the meter area. A majority of older houses do not have provisions for a central breaker which is positioned at the juncture, thus it could be necessary to install an upgraded service. Within this, you would be required to set up a fresh meter in addition to the key breaker panel within the house, plus reinstate the interior panel too.

Furthermore, in case the house possesses a FPE, or Federal Pacific Electric panel, ensure that it is updated, as they are untrustworthy as well as hazardous.

Next, assess the grounding system. This means that you should look for a ground rod which is positioned beneath the meter by means of a wire linking it to the meter panel, as well as a cold water bond which is situated at the water heater resting on the chief water ingestion of the system, via the copper water pipes like a grunt.

When you are assessing your home electrical system, inspect the type of wiring that was used all through the house.  This can be achieved by merely dissecting the fuse panel or else the breaker which would make it easier for you to glance to perceive if it is made out of copper or aluminum. If the wiring is made out of copper, it is alright. However, in case it is made out of aluminum, you should assess if there is any indication of corrosion. Remember that an Aluminum wire will respond to oxygen while moving current, after which it will corrode and will be seen in the form of powder.

If you witness any signs of damage, do not try to fix this yourself and immediately seek the services of a specialized electrician who would assist you.

, ,

Old breaker panel can lead to dimming lights: Hire the best electrical service

October 29th, 2010

How often have we heard of people getting electrocuted when trying to fix their breaker panel? The answer is – too often. It is a human nature to think that we are should be able to resolve the issues ourselves. We do not realize that electrical panels and wires are extremely dangerous; it can even take our life. Our homes and offices are full of electrical apparatus and in order to make sure they work properly we take extra precautions and also use the services of electricians and electrical contractors. An old or worn out breaker panel is not only dangerous and can cause fire, but it can also be damaging your appliances and electronic equipment.

An electrical contractor is an expert and can tell you about the breaker panels that are available in different ranges.  For example if you need to upgrade or install a new breaker panel and do not require a lot of electricity, then you can opt for a panel that offers 100 amps.  If you have a huge house or office with many electrical apparatus then you may need a panel with a ampere of 200 or more. There are options of sub-panel as well; it can also be installed if you want to make any addition to in electrical appliances or you would like to stretch to a corner of your house. Therefore, it is vital that you know your needs. The best way to figure out is to get in touch with an electrician, and make a list of electrical appliances that you have and accordingly they would suggest to you the best electrical panel.

Necessary precautions have to be taken in the installation of circuit breaker panels as it can be very dangerous. An option to the circuit breaker is an electrical fuse. The first step while installing a circuit breaker is to switch off the main power that is connected to the panel which is to be replaced, even after switching off the main power, it is advisable to test that panel is no longer receiving current. There are other factors that must be taken into consideration while installing circuit breaker panel, check how much electricity you would require for running your electrical appliances, the number of breakers you need.

It is strongly suggested that you not try to work on the electrical system in your own home and request the service of an electrician or electrical contractors in New Jersey as they have years of experience and training when providing this type of electrical service.

Visit http://www.kaiserelectriccoinc.com to know more about “Electrician Contractors“.

, , , , , , , , ,

A lightning strike can cause immediate & severe damage: Install surge protectors

October 20th, 2010

We are surrounded with machines, no matter where we are, be it our office or our home. Life would come to a standstill without machines; we can’t live without television, computers, cell phones, etc. Because our homes are full of electrical machines, what we don’t realize is that we are living in constant danger because anytime there could be a short circuit and many other accidents can occur if there is frequent fluctuation in the voltage. Moreover, we should not forget that a lightning strike could destroy all the expensive electrical appliances. Therefore, we must take necessary precautions to avoid electrical hazards in our homes and hence we should take the service of electrical contractors or electricians. The first advice that all the electricians would give is to install a surge protector, as it helps to balance the supply of the voltage to electrical machines, and because of the voltage spike, the electronic devices may malfunction.

A surge protector would look like any other electrical appliance in design and has a power line that is connected to the underground wire. The purpose of this is to assist in detecting excessive current that may be harmful to other cables connected to other electrical apparatus. Surge protectors are also called surge suppressors and are the most important tools to protect your electrical devices, like computers that are highly susceptible to the fluctuations of electricity supply, which is more commonly known as a voltage spike. There are many factors that can result in fluctuation of the electricity coming into your home. If either the spike or surge is high, it can result in a serious damage to your electric system. A consultation with an electrician about installing a surge protector is highly recommended.

A surge protector has become an indispensable tool for every home. There are different kinds of surge protectors that are available in the market and it is very imperative that one has detailed information before purchasing it, one should understand its needs and how and what kind of surge protector would suit better. The best thing to do is to get in touch with an electrical contractors, who would help in making decisions about surge protection and the best of the contractors are available online as well. Various surge protectors provide the options of plugging multiple components into a single power outlet.

It is found that an average house in the United States receives a standard voltage of 120 volts and naturally if the voltage increases significantly and the electricity flow crosses the designated level mark, it can cause serious repercussions, even danger of a fire breakout. Therefore, it is of utmost importance that you take ample care and prevention in electrical wiring of your house or office and make sure to install surge protectors with assistance from an electrical contractor and thus have the peace of mind.

Further information about NJ Electricians visit http://www.kaiserelectriccoinc.com

, , , , ,