How to know your home electrical system safe or not

January 24th, 2011

It is quite a simple process to ascertain if your home electrical system is safe or not. You would be required to invest some time and effort so that you can assess certain things. Most states require a home inspection prior to selling the house. This is the reason why it is essential to ascertain if your home electrical system is safe or not.

The best way to analyze the electrical system within your house is to ensure that you test out the source of the electrical system, and this includes the meter area. A majority of older houses do not have provisions for a central breaker which is positioned at the juncture, thus it could be necessary to install an upgraded service. Within this, you would be required to set up a fresh meter in addition to the key breaker panel within the house, plus reinstate the interior panel too.

Furthermore, in case the house possesses a FPE, or Federal Pacific Electric panel, ensure that it is updated, as they are untrustworthy as well as hazardous.

Next, assess the grounding system. This means that you should look for a ground rod which is positioned beneath the meter by means of a wire linking it to the meter panel, as well as a cold water bond which is situated at the water heater resting on the chief water ingestion of the system, via the copper water pipes like a grunt.

When you are assessing your home electrical system, inspect the type of wiring that was used all through the house.  This can be achieved by merely dissecting the fuse panel or else the breaker which would make it easier for you to glance to perceive if it is made out of copper or aluminum. If the wiring is made out of copper, it is alright. However, in case it is made out of aluminum, you should assess if there is any indication of corrosion. Remember that an Aluminum wire will respond to oxygen while moving current, after which it will corrode and will be seen in the form of powder.

If you witness any signs of damage, do not try to fix this yourself and immediately seek the services of a specialized electrician who would assist you.

, ,

Use of Dimmers

November 29th, 2010

Light is an indispensable factor when you think about decorating your house. The amount of light in a room reflects your mood. Different parts of your house require different levels of light to differentiate between the brighter and lighter areas of your home. Therefore, the use of dimmers has become prevalent. A dimmer is basically used for adjusting light in a room, which can be used for various purposes. It can help you to concentrate on your work by providing bright illumination or even help you feel comfortable during a romantic dinner.

Dimmers are used extensively in today’s times and therefore its choice and installation requires great care and attention. Luckily, we have Electrical Contractors who can not only assist us in selecting the proper dimmers but also make our lives easy by proper installation and effective troubleshooting. No doubt, people believe in DIY phenomenon, however electricity is one thing which requires proper attention hence it is always advisable to get the services of a professional and mitigate the risks of electric shock or even electrocution.

Before going for a dimmer make sure you know the proper type to use. There are different types of light dimmers available in the market, which can be distinguished on the basis of their mechanism and functioning. However, it is advisable to go for electronic light dimmers as they effectively dim light and also save energy. A dimmer has a number of resistors which rapidly switch the light circuit off and on to reduce the total energy flowing through the circuit. The circuit is switched off a lot of times each second. Since alternating current has a diverse voltage priority, a dimmer automatically switches the light bulb circuit off every time current reverses direction that is whenever there is zero voltage running through the circuit. This happens 120 times per second. It turns the light cycle up to a certain level. This way light dimmers also help us to save considerable amount of energy.

Dimmer switches come in various styles: dial, slide, touch pad and combination light switch/dimmer slide. You should discuss the requirements with your electrician and get the one, which is most suitable for you according to your style and budget. A good way to get these installed at your home is through Electrical Contractors at NJ.

The following evaluation needs to be made

  • Evaluate what type of dimmers are required and how many?
  • Consider your budget as against your needs.
  • Check the voltage regulation at home and ensure you buy a matching dimmer.
  • Find out the best electrician available by referring to your friends and neighbors.
  • Clarify the requirements of the work to be executed and estimate the budget of the expenses.
  • Execute the contract specifying the cost involved, the estimated time of completion and any after sale services involved.

Just remember it’s wise not to take risks with electricity and electrical equipments.

Therefore, take the advice of a professional and light up your home according to your mood and according to the occasion.

visit http://www.kaiserelectriccoinc.com to know more about Electrical Contractors at NJ

,